1 / 5
ACEBOTT High Precision Integrated Electronic Component BMP280 Chip Barometric Pressure Sensor for Arduino Weather Station Kit
Product Description
Product Overview
The Barometric Pressure Sensor adopts the high-precision BMP280 chip and integrates dual functions of ambient temperature measurement and atmospheric pressure detection. It reliably calculates altitude and environmental barometric variations while providing calibrated temperature data for thermal compensation. In advanced positioning applications, this sensor significantly enhances GPS capabilities and works seamlessly with IMU sensors to establish three-dimensional indoor navigation.
Applications:
Weather Stations
Indoor Navigation
Pneumatic Altimeters
UAVs / Drones
Technical Specifications
| Operating Voltage | 5V |
| Air Pressure Detection Range | 300 ~ 1100 hPa |
| Air Pressure Detecting Relative Accuracy | ±0.12 hPa (±1 m) |
| Temperature Measurement Range | 0°C ~ 65°C |
| Temperature Measurement Accuracy | 0.01°C |
| Output Protocol | I2C |
| Operating Temperature | -10°C ~ +50°C |
| Dimensions (Size) | 3.2 cm × 2.4 cm |
Pinout & Hardware Interface
| Barometric Pressure Sensor Pin | ESP32 Pin Connection |
|---|---|
| SCL | SCL |
| SDA | SDA |
| VCC | 5V |
| GND | GND |
Note: The expansion board is attached directly to the ESP32 controller board for seamless pin mapping and testing.
Product Demonstration & Details
Frequently Asked Questions (FAQ)
Q
What are the primary sensing capabilities of this module?
The sensor module utilizes a BMP280 chip to perform two main functions: ambient temperature detection and high-accuracy atmospheric air pressure detection.
Q
What is the communication protocol and operating voltage?
The module operates at a supply voltage of 5V and outputs measurement data via the standard I2C digital communication interface.
Q
What are the measurement ranges and relative accuracy?
It supports an atmospheric pressure range of 300 to 1100 hPa with a relative accuracy of ±0.12 hPa (equivalent to ±1 meter). The temperature range spans 0°C to 65°C with a 0.01°C resolution accuracy.
Q
How is this sensor wired to an ESP32 microcontroller?
Connect the sensor pins directly to the ESP32: SCL connects to SCL, SDA to SDA, VCC to 5V, and GND to GND. An expansion board mounted on the ESP32 controller makes these pin connections straightforward.
Q
In what projects and equipment can this sensor be utilized?
Typical application scenarios include weather observation stations, pneumatic altimeters, unmanned aerial vehicles (UAVs / drones), and three-dimensional indoor navigation systems when fused with IMU sensors.
